Figure 3-20
Please refer to the following sheet for detailed information.
IEEE802 3.3.11
IEEE802.1X works standing for local and metropolitan area networks and port based network access
control protocol. It supports manual operation of the client to choose means of authenticating by which
to control it to access to the Local Area Networks or not. It supports the ability to authenticate, to
calculate fee, to ensure security and to maintain requirements. See Figure 3-21.
Parameter Function
Enable
Select to enable multicast function. Stream(1) and Stream(2) cannot be used
at the same time.
Multicast Address
The range of multicast address of Stream(1) and Stream(2) is 224.0.0.0 -
239.255.255.255.
Multicast Port Multicast port. The range is 1025 - 65534.
44
To Next Page
Loading...
