Figure 3-30
Figure 3-31
You can set specified dates as holiday. When snapshot of holiday is enabled, the selected dates will be
snapshot/recorded according to holiday setup.
Destination 3.5.2
Path 3.5.2.1
The destination interface is shown as in Figure 3-32.
Path can config record and snapshot storage path. There are two options: FTP and NAS. You can only
select one mode. System can save according to the event types. It is corresponding to the two modes
(general/motion) in the Schedule interface. Please check the box to enable the save functions.
53
To Next Page
Loading...
