Parameter Function
Working
Period
Video masking function becomes activated in the specified
periods.
There are six periods in one day. Please draw a circle to
enable corresponding period.
Select date. If you do not select, current setup applies to
today only. You can select all week column to apply to the
whole week.
Click OK button, system goes back to VMD interface, please
click save button to exit.
Record After record is enabled, video masking can activate video.
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert
you when alarm occurs.
Snapshot
After snapshot is enabled and alarm happens, the system will
automatically snapshot and alarm.
Abnormity 3.4.2
Abnormity includes Disconnection, IP Conflict and Unauthorized Access.
When device is offline or IP conflicts, the network error alarm occurs.
Parameter
It includes: Disconnection, IP Conflict
Check to alarm when network is abnormal.
To Next Page
Loading...
