Panasonic K-EW114L01E

To Next Page

To Previous Page

Figure 3-25

Please refer to the following sheet for detailed information.

Parameter Function

Sensitivity

It is sensitivity of brightness as VMD is more possible to be

trigger with high sensitivity. You can set up to four areas. The

range is 0 - 100. The recommenced value is 30 - 70. The default

is 60.

Threshold

It is to check target object area related to detection area. The

lower the area threshold, the easier to trigger VMD. You can set

up to four areas. The range is 0 - 100. The recommenced value

is 10 - 50.

Delete All Clear all areas.

Delete Delete selected area.

Tampering 3.4.1.2

The tampering interface is shown as in Figure 3-26 and Figure 3-27.

Panasonic K-EW114L01E - Page 52