Panasonic KM-CC17R2 Series - Page 29

28
BASIC OPERATION ON LCD TOUCH PANEL
●Operation from Menu key
■Menu screen
Page
◆Set → ■Stand-by Setting screen
(Setting)
Temp., CO
2
density, high limit temp. alarm
A
uto lock ON/OFF*
1
31～32
66～68
◆Log → ■Log screen
◆Chart → ■Chart screen
◆Actual Temp.
(Display) Chamber temp. log graph (can be exported)
40～42
◆Actual CO
2
Level
(Display) CO
2
density log graph (can be exported)
40～42
◆Door Opening
(Display)
Outer door opening log graph
(can be exported)
40～42
◆Data
Export
→ ■Export screen
◆Actual Temp.
(Export) Chamber temperature log
43～45
◆Actual CO
2
Level
(Export) CO
2
density log
43～45
◆Door Opening
(Export) Outer door opening log
43～45
◆Setting
(Setting) Log interval
39～40
◆Alarm
(Display)
A
larm log (can be exported)
46～47
◆Alarm Export
(Export)
A
larm log
48～50
◆Key Lock → ■Key Lock screen
(Setting) Key lock ON/OFF, password
33～35
◆Tools#1 → ■Tools#1 screen
◆Temp./CO2 Calibration
Don’t push (See Next page)
◆Alarm Setting #1
(Setting) Temp. alarm, CO
2
density alarm
36～37
◆Alarm Setting #2
(Setting)
A
larm delay, ring back, remote alarm etc
36～38
◆UV Setting*
2
(Setting)
(Operate)
UV timer, power supply frequency
Lighting UV lamp for 24 hours
55～57
58～59
◆STD Gas Setting*
3
(Setting) CO
2
density of standard gas
73～74
◆STD Gas Calibration*
3
(Operate) Calibration of CO
2
density by STD gas
74～75
◆Tools#2 → ■Tools#2 screen
◆Date & Time
(Setting) Date, time 51
◆Brightness/Sleep
(Setting) Brightness, sleep ON/OFF etc
52～53
◆DAQ Setting*
4
(Setting) DAQ system ON/OFF, ID, speed etc 54
*1: KM-CC17RH2A or when an optional electric lock KM-CCPL1W is installed.
*2: KM-CC17RH2A/CC17RU2A or when an optional UV system set KM-CCP17US2A is installed.
*3: When an optional STD gas autocalibration kit MCO-SG-PW is installed.
*4: Only when using an optional software product Data acquisition system MTR-5000-PW.
Note: Service key is not available. (Qualified engineer only)