29
Note: On the Tools #1 screen, by mistakenly
pressing Temp./CO
2
Calibration key, Temp./CO
2
Calibration screen is displayed.
When this screen is displayed, press Back key to
return to the Tools #1 screen, or press Top key to
return to the Top screen.
When these settings on this screen are changed,
inaccurate temperature or CO
2
density may be
displayed.
●Operation from other than Menu key
◆CO
2
gas supply line select key: (Operate) Manual changeover
between CO
2
gas supply line A and B (Page 72)
◆Message select key:
(Operate) Changing some messages
◆H
2
O
2
key*
5
: (Operate) H
2
O
2
decontamination (Page 60～65)
◆Unlock key*
6
: (Operate) Unlock the outer door. (Page 66～68)
◆Buzzer key: (Operate) Silencing the buzzer (Alarm is not canceled except for some alarms; page 78)
*5: Under any of the following conditions only.
・When an H
2
O
2
generator MCO-HP-PW is installed in the KM-CC17RH2A.
・When all H
2
O
2
generator MCO-HP-PW, H
2
O
2
decon board KM-CCPHB1A and electric lock KM-CCPL1W
in the KM-CC17RU2A.
・ When all UV system set KM-CCP17US2A, H
2
O
2
generator MCO-HP-PW, H
2
O
2
decon board
KM-CCPHB1A and electric lock KM-CCPL1W in the KM-CC17R2A.
*6: For the KM-CC17RH2A or an optional electric lock KM-CCPL1W is installed, when the auto lock
function is ON.
To Next Page
Loading...
