M
Mitchell ScottAug 21, 2025
Why is my Panasonic KX-A405 Repeater not working?
- Mmelissa19Aug 21, 2025
Your Panasonic Repeater might not be working due to several reasons. First, ensure the AC adapter is properly connected. If the indicators aren't green, move the unit closer to the base unit. It's also possible that the registration has been cancelled; in this case, deregister the unit and then re-register it. To deregister, unplug the AC adapter, press and hold the {PROGRAM} button, then reconnect the AC adapter while still holding {PROGRAM}. Keep holding for about 10 seconds until the & indicator stops flashing and lights red, then release {PROGRAM}. If deregistration fails (the & indicator flashes green), try again. To re-register, unplug the AC adapter and follow the steps from 'Installation/Registering the DECT repeater to the base unit'.