Panasonic KX-DT 343 Series - Speed Dialing and Phone Programming; Call Hold and Pickup Procedures; Conference Calls and Speed Dial; One Touch Dialing Programming

Page 4 of 5
573-874-0101
To Place a Call on Hold:
With the caller on the line press HOLD . The active outside line button flashes green.
Press the HOLD button twice for exclusive hold.
To retrieve a call on hold:
A call that is holding on your extension will flash green. A call holding on another
extension will flash red. Press the line that you would like to pick up. (lamp will turn
solid green.
To pick up a call that is ringing on another extension (directed call pick-up)
Press *41 + extension number of ringing phone.
To make a conference call: (maximum 8 parties)
While on a call, press CONF , make 2
nd
call, press CONF , etc
Personal Speed Dial (00-09)
To Program: Lift handset. Press * 3 0 , then enter the desired 2-digit code (00-09),
enter the line access code (generally “9”) followed by the telephone number, then #
To Use: Lift handset. Press AUTO DIAL/STORE * plus the 2-digit code (00-09).
To Use System speed Dial: Lift handset. Press AUTO DIAL/STORE plus 3-digit (000 - 999)
______________ _
Programming your phone for One Touch Dialing:
STEP 1:
Press
PAUSE or PROG (soft key)
Press the One Touch button that you would like to program
Press
CLEAR (soft key) to erase any previous programming
STEP 2:
To Program a Speed Dial Number:
Dial the Line Access Code (generally “9”) followed by the phone number
OR
To Program a Feature Button:
Press the feature code (if you do not know the code then simply press the
SP-PHONE
button to scroll through the features.
OR
To Program an Extension:
Press
SP-PHONE (display shows “EXT-“) enter the extension number and press ENTER
STEP 3:
Press
AUTO DIAL/STORE or Enter (soft key)
Press PAUSE or Exit (soft key)