2. Preparation
23
For assistance, please visit http://www.panasonic.com/help
Note:
L To enter another character that is located on the
same dial key, press {>} to move the cursor to the
next space.
To enter your logo
Example: “BILL”
1. Press {2} 2 times.
LOGO=|B
2. Press {4} 3 times.
LOGO=B|I
3. Press {5} 3 times.
LOGO=BI|L
4. Press {>} to move the cursor to the next space and
press {5} 3 times.
LOGO=BIL|L
To change uppercase or lowercase letters
Pressing the {#} key will change to uppercase or
lowercase alternately.
1. Press {2} 2 times.
LOGO=|B
2. Press {4} 3 times.
LOGO=B|I
3. Press {#}.
LOGO=B|i
4. Press {5} 3 times.
LOGO=Bi|l
To correct a mistake
1. Press {<} or {>} to move the cursor to the incorrect
character.
2. Press {Stop}.
L To erase all characters, press and hold {Stop}.
3. Enter the correct character.
To select characters using {A} or {B}
Instead of pressing the dial keys, you can select
characters using {A} or {B}.
1. Press {B} repeatedly to display the desired
character. Characters will be displayed in the
following order:
1 Uppercase letters
2 Number
3 Symbol
4 Lowercase letters
L If you press {A}, the order will be reversed.
2. Press {>} to insert the character.
3. Return to step 1 to enter the next character.
{6} MNOmn o6
{7} PQRSp qr s7
{8} TUVt uv8
{9} WXYZw x y z 9
{0} Space 0
{#} To change uppercase or
lowercase letter.
{Flash} To enter a hyphen.
{Handset Mute} To insert a space.
{Stop} To delete a digit.
Keypad Characters
FL421-PNQX3022ZA-OI-en.book Page 23 Thursday, July 29, 2010 9:35 AM
To Next Page
Loading...
