EasyManua.ls Logo

Panasonic KX-FL501 - Installation Space; Installing the Paper Tray

Panasonic KX-FL501
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.14. INSTALLATION
1.14.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
· Avoid excessive heat or humidity.
· Use the unit within the following ranges of temperature and humidity.
· Ambient temperature: 5°C to 35°C
· Relative humidity: 20% to 80% (without condensation)
· Power cord length should be less than 5 meters (16.4 feet). Using a longer cord may reduce the voltage or cause
malfunctions.
· Avoid direct sunlight.
· Do not install near devices which contain magnets or generate magnetic fields.
· Do not subject the unit to strong physical shock or vibration.
· Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
· To protect the unit from damage, hold both sides when you move it.
1.14.2. INSTALLING THE PAPER TRAY
Install the paper tray into the two slots on the back of the unit firmly unit
(
). Let it lean back until it clicks into place ( ).
Note:
· Do not place the unit in areas where the paper tray may be
obstructed by a wall, etc.
14
KX-FL501

Other manuals for Panasonic KX-FL501

Related product manuals