1.14.3. INSTALLING THE RECORDING PAPER
Letter* or legal** size recording paper can be loaded. The unit can hold up to 150 sheets of 60 g/m
2
to 75 g/m
2
(16 lb. to 20lb.)
paper or 120 sheets of 90 g/m
2
(24 lb.) paper.
*Letter=216 mm × 279 mm (8 1/2” × 11”)
**Legal=216 mm × 356 mm (8 1/2" × 14")
The unit is set for letter size paper by default. If you want to use legal size paper, change the setting (feature # 16).
1. Fan the stack of paper to prevent a paper jam.
2. Insert the paper into the recording paper entrance.
· The paper should not be over the tab.
· If the paper is not inserted correctly, readjust the paper
or the paper may jam.
Note for recording paper:
· Avoid using paper with a cotton and/or fiber content that is over 20%, such as letterhead paper or paper used for
resumes.
· Do not use different types or thicknesses of paper at the same time. This may cause a paper jam.
· Avoid extremely smooth or shiny paper that is highly textured.
· Avoid paper that is coated, damaged or wrinkled.
Note:
· Avoid double-sided printing
· Do not use paper printed from this unit for double-sided printing with other copiers or printers, or the paper may jam.
· Some paper only accepts print on one side. Try using the other side of paper if you are not happy with the print quality.
15
KX-FL501
To Next Page
Loading...
