1.14.4. ADDING PAPER TO THE PAPER TRAY
1.
2.
3.
4.
Remove all of the installed paper.
Add paper to the removed paper and straighten.
Fan the stack of paper.
Insert the paper into the recording paper entrance.
1.14.5. DOCUMENTS THE UNIT CAN FEED
Note:
· Remove chips, staples or other similar fastening objects.
· Check that ink, paste or correction fluid has dried.
· Do not send the following types of documents. Use copies for fax transmission.
— Chemically treated paper such as carbon or carbon less duplicating paper
— Electrostatically charged paper
— Heavily curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the front (e.q. newspaper)
16
KX-FL501
To Next Page
Loading...
