Panasonic KX-FL501 - Automatic Dialing; Storing Names and Telephone Numbers in JOG DIAL

23
Automatic Dialing
Storing names and telephone numbers
in JOG DIAL!
For rapid access to frequently dialed numbers, the unit provides a JOG DIAL directory (100
stations).
For your convenience, the following 2 stations have been pre-programmed.
HELP-FAX (1-800-435-7329): If you cannot correct a problem after trying the help function
(p. 9), call using this station (p. 25).
IQ-FAX-CS (IQ-FAX Customer Service Center)(1-888-332-9728): If you have a problem with
IQ-FAX, call using this station (p. 25).
●
If you do not need the above stations, you can erase them (p. 24).
1
Press .
Display:
2
Rotate until the following is
displayed.
3
Enter the name, up to 10 characters (see
page 19 for instructions).
Example:
4
Press .
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
●
If you want to enter a hyphen, press .
6
Press .
●
To program other items, repeat steps 3 to 6.
7
Press to exit the
program.
DIRECTORY PROGRAM
NAME=
REGISTERED
SET
FLASH
NO.=5552233
NO.=
SET
NAME=Alice
NAME=
JOG DIAL
OR USE JOG-DIAL
PRESS STATION
DIRECTORY PROGRAM
/
(Hyphen)
FLASH
STOP
(Delete)
JOG DIAL
SET
DIRECTORY PROGRAM
Display
Helpful hint:
●
You can confirm the stored items on the
display (p. 25) or on the telephone number list
(p. 76).
Note:
●
When the following message is displayed in
step 6, you can store only 5 more items.
Display:
●
If there is no space to store new stations, the
following message is displayed in step 1.
Erase unnecessary stations (p. 24).
●
A hyphen or a space entered in a telephone
number counts as two digits.
JOG-DIAL FULL
SPACE= 5 DIRS.
To correct a mistake
●
Press or to move the cursor to the
incorrect character/number, and make the
correction.
To delete a character/number
●
Move the cursor to the character/number you
want to delete, and press .
STOP