Panasonic KX-FL541 - Direct Commands for Programming

7. Programmable Features
49
L The connecting tone volume cannot be
adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
Code #79: Setting toner save feature
TONER SAVE
MODE=OFF [±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command, using the
dial keypad, to display the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
Program code and direct command key
{#}{0}{0} Quick Setup
– {1}: “FAX ONLY” (default)
– {2}: “DIST. RING”
– {3}: “EXT. TAM”
– {4}: “TEL ONLY”
L Press {SET} before pressing the direct
command key.
{#}{0}{1} Date and time
L Enter the date and time using the dial keypad
(see page 28 for details).
{#}{0}{2} Your logo
L Enter your logo using the dial keypad (see
page 29 for details).
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad
(see page 30 for details).
{#}{0}{4} Sending report
– {1}:“ON”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{0}{6} Fax ring count
– {1}:“1”
– {2}:“2”
– {3}:“3” (default)
– {4}:“4”
– {5}:“5 EXT.TAM”
{#}{1}{2} Remote activation ID
– {1}:“ON”
– {2}:“OFF” (default)
L If you select “ON”, then enter your ID from 1 to
5 digits using 0-9, * and #.
{#}{1}{3} Dialing mode
– {1}:“PULSE”
– {2}:“TONE” (default)
{#}{1}{6} Paper size
– {1}:“LETTER” (default)
– {2}:“A4”
– {3}:“LEGAL”
{#}{1}{7} Ringer pattern
– {1}:“A” (default)
– {2}:“B”
– {3}:“C”
{#}{2}{2} Journal report
– {1}:“ON” (default)
– {2}:“OFF”
{#}{2}{3} Overseas mode
– {1}:“NEXT FAX”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{2}{5} Delayed transmission
– {1}:“ON”
– {2}:“OFF” (default)
L If you select “ON”, then enter the fax number
and transmission time using the dial keypad
(see feature #25 on page 47 for details).
{#}{2}{6} Caller ID list
– {1}:“ON” (default)
– {2}:“OFF”
{#}{3}{1} Distinctive ring
– {1}:“ON”
– {2}:“OFF” (default)
FL541.book Page 49 Wednesday, August 27, 2003 7:07 PM