Panasonic KX-FM131CX - Voice Contact; Talking to the Caller after Fax Transmission or Reception

43
Voice Contact
Telephone
Talking to the caller after fax transmission or
reception
You can talk to the other party on the same call after a fax message is completed. This will save the added
expense and time of making another call.
This feature only works when the other party’s fax machine is equipped with a voice contact feature.
Initiating voice contact
1
Press / while
transmitting or receiving documents.
Display:
●
Your unit will call the other party with a distinctive
ring.
●
When the other party answers, your unit will emit
a distinctive ring.
2
Lift the handset to start talking.
VOICE STANDBY
DIGITAL SP-PHONE
MONITOR
Handset
FACE DOWN
Microphone
(KX-FM131)
DIGITAL SP-PHONE
MONITOR
(KX-FM131)
(KX-FP105)
Note:
●
If you initiate voice contact during transmission, the unit
will call you with a distinctive ring after all of the
documents have been transmitted.
●
If you initiate voice contact during reception, the unit
will call you with a distinctive ring after the current page
of the document is received.
Receiving a request for voice contact
1
If the other party initiates voice contact, your unit
will sound a distinctive ring and the following will be
displayed.
Display:
2
Lift the handset within 10 seconds of the distinctive
ring to start talking.
PLEASE PICK UP
Microphone
(KX-FM131)
DIGITAL SP-PHONE
(KX-FM131)
Handset
Note:
●
If you do not answer within 10 seconds of the distinctive ring;
— If in the FAX ONLY, TEL or TEL/FAX mode, the line will be disconnected.
— If in the TAD/FAX mode, your unit will play a greeting message and record an incoming voice message
(KX-FM131 only).
Helpful hint:
●
You can press instead of lifting
up the handset in step 2 (KX-FM131 only).
DIGITAL SP-PHONE
Helpful hint:
●
You can press instead of lifting
up the handset in step 2 (KX-FM131 only).
DIGITAL SP-PHONE