EasyManua.ls Logo

Panasonic KX-FP207FX-S

Panasonic KX-FP207FX-S
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
KX-FP207FX-S/FP218FX-S
Note:
The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.
10.1. DTMF Signal Tone Transmit Selection
When set to ON (=1), the 12 keys and transmission fre-
quencies are as shown.
When set to OFF (=2), the 12 keys and transmission fre-
quencies are as shown.
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialling in DTMF signal will not work.
SENSOR CHECK &
VOX CHECK
Service Mode “8” “1” “5” If you enter this mode and operate sensor levers with your hands, the LCD dis-
play of the related sensor (or switch) turns ON / OFF. Also, when copying a docu-
ment, the related sensor will turn ON / OFF. (Do, Sn, Co, Mo, Pt, Ri, Vx)
For each sensor’s operation, refer to Sensors and Switches (P.29).
Do Sn Co Mo Pt Ri Vx
: LCD DISPLAY
Do: Document set sensor
:Turns on when the front cover us opened and a document is inserted.
Sn: Read position sensor.
:Turned on when the front cover is opened and starts to read a document.
Co: Cover open sensor
:Turned off when the cover is opened.
Mo: Motor home position sensor
:A home position detection sensor that is used when shifting the motor mode.
Pt: Paper top sensor
:Turned on when the cover is opened and detects a recording paper on the
right side end.
Ri: Film sensor
:Turned off when the film are run out.
Vx: Vox signal
:Detection signal for the tone on the line. Turns on when there is a tone signal
on the line.
• Press [STOP] button to quit.
DIGITAL SPEAKER-
PHONE RX & TX
CHECK (KX-FP218)
Service Mode “8” “4” “1” Please refer to Digital Speakerphone (KX-FP218) (P.126)
SPEAKERPHONE
PRINT TEST
PATTERN
Service Mode “8” “5” “2” Prints out the test pattern.
Used mainly at the factory to test the print quality.
You can select 1~4. (See Print Test Pattern (P.61))
Test Mode Type of Mode Code Function
Operation after code
input
key High Frequency (Hz) key Low Frequency (Hz)
“1” 697 “5” 1209
“2” 770 “6” 1336
“3” 852 “7” 1477
“4” 941 “8” 1633
High (Hz) 1209 1336 1477
Low (Hz)
697 “1” 2” “3”
770 “4” 5” “6”
852 “7” 8” “9”
941
“”
“0” “#”

Table of Contents

Related product manuals