Panasonic KX-HCM110A

Item Description
OperationSystem
Microsoft Windows XP
Microsoft Windows 2000
Microsoft Windows Me
Microsoft Windows 98SE
CPU
-
Forviewingsinglecamera
Pentium III(800MHzorgreaterisrecommended.)
-
Forviewingmultiplecameras
Pentium 4(1.8GHzorgreaterisrecommended.)
Protocol TCP/IPprotocol(HTTP,TCP,UDP,IP,DNS,ARP,ICMP)
Interface 10/100Mbpsnetworkcardinstalled
WebBrowser InternetExplorer6.0orlater(NotincludedontheSetupCD-ROM)
Audio Audioinput/outputfeature(Microphoneorspeaker)
ForIPv6Connection
Item Description
OperationSystem
Microsoft Windows XPServicePack1orlater
CPU
-Forviewingsinglecamera
Pentium III(800MHzorgreaterisrecommended.)
-
Forviewingmultiplecameras
Pentium 4(1.8GHzorgreaterisrecommended.)
Protocol TCP/IPprotocol(HTTP,TCP,UDP,IP,DNS,ICMPPv6,NDP)
Interface 10/100Mbpsnetworkcardinstalled
WebBrowser InternetExplorer6.0orlater(NotincludedontheSetupCD-ROM)
Audio Audioinput/outputfeature(Microphoneorspeaker)
Note:
SeePanasonicNetworkCamerasupportwebsiteat
http://panasonic.co.jp/pcc/products/en/netwkcam/forthelatestinformationaboutwebbrowser.
7.2.CONNECTTHECAMERATOYOURROUTER
ConnectthecameratoyourrouterwithanEthernetcabletosetupthecamera.
-Beforeyoubegintheinstallation,theUPnP featureinyourrouter
needstobeenabled.Usually,thedefaultsettingdisablesthisfeature.
Formoreinfo,pleasevisit,http://panasonic.co.jp/pcc/products/en/
netwkcam/orcontactyourrouter'smanufacturer.
-TheseinstructionsassumeyourPCisalreadyconnectedtotheInternet
andyourhomenetworkincludesarouterthatisUPnP andPlay)
compliant.
15