ThecamerahasaFactoryDefaultResetbuttonontherear.
PressingtheFactoryDefaultResetbuttonresetsthecameratofactorydefault.
Ifyouloseyourusernameandpassword,usethisbuttontoresetthecamera.
-PresstheFactoryDefaultResetbuttonfor1secondwhenthecamerais
on.
-Theindicatorblinksorange,andturnofffor10seconds.
-Donotturnoffthecamerauntiltheindicatorlightsgreen.
Note:
-Internalclockwillnotbereset,butthetimeformatwillreturntoAM/PM
mode.Setitagain.
-Allbufferedimagesaredeletedwhenresettingthecameratofactory
default.
-Theresetoperationtakesabout1minute.
11.2.RESETTINGTHECAMERATOFACTORYDEFAULT
ThisfeaturewillbeexecutedandallcamerasettingsresettofactorydefaultdirectlyaftertheExecute
buttonisclicked.
1.Click[ResettoFactoryDefault]ontheMaintenancepage.
2.Click[Execute].
-Theindicatorblinksorange,andturnofffor10seconds.
-Allcamerasettings(username,password,IPaddress,subnetmask
etc.)areresettofactorydefault.
-Ifthecameraisresettofactorydefault,thenetworkconnection
modechangesto[AutomaticSetup].Reconfigurethecameraseeingthe
GettingStarted.
Note:
-Internalclockwillnotbereset,butthetimeformatwillreturntoAM/PM
mode.Setitagain.
-PleaserefertoOperatingInstructionsfordefaultvalues.
-PressingFACTORYDEFAULTRESETbuttonresetsthecameratothe
factorydefault.
-Allbufferedimagesaredeletedwhenresettingthecameratofactory
49