Replacing the battery
R USE ONLY the specified battery.
1 Remove the screw from the battery cover.
2 Remove the battery cover.
3 Remove the currently used battery.
4 Attach and insert the replacement battery.
5 Insert the tabs (A) into the slots, and
then close the battery cover (B).
6 Drive the screw into the battery cover.
Battery level
Icon Battery level
High
Medium
Low
Needs charging.
*1
*1 Two beeps sound from the monitor unit
every 3 minutes when the battery needs
charging.
Lithium Ion (Li-Ion) Polymer
battery performance (supplied
battery)
Operation Operating time
In continuous use 5 hours max.
Not in use (standby) 13 hours max.
For assistance, visit www.panasonic.ca/english/support
15
Getting Started
HN3051C(enen)0228ver.040.pdf152018/02/2816:25:29
To Next Page
Loading...
