Turning the power on/off
Press M N located on the top of the monitor
unit (page 10) for about 2 seconds.
R Press M
N to enter sleep mode and turn off
the display (page 20).
Press any key on the monitor unit to exit
sleep mode and turn on the display.
Language setting
1 MMENUN
2 M
bN: “Monitor Settings” a MOKN
3 M
bN: “Language” a MOKN
4 M
bN: Select the desired language. a
MOKN a MMENUN repeatedly to exit.
Note:
R How to change from French back to
English:
1 MMENUN
2 M
bN: “Paramètres moniteur” a
MOKN
3 M
bN: “Langue” a MOKN
4 M
bN: “English” a MOKN a
MMENUN repeatedly to exit.
Smart LED indicator and
display icon colours
The colours of the smart LED indicator and
display icons (page 16) indicate the status of
the sensors. When sound or motion is
detected, the smart notification feature
(page 26) lights the smart LED indicator and
displays the motion and sound icons
according to the level of motion or sound
detected. The smart LED indicator also lights
when temperature is detected outside of the
specified limits (page 20).
Smart LED
indicator
colour
Display
icon
colour
Status
Off Off No detections
Off White
(
only)
Normal operations
Green Green Motion or sound
detected at the
lower threshold
level
Example:
When your baby
makes small
movements or
cries quietly.
Amber Amber R Motion or
sound detected
at the higher
threshold level
Example:
When your
baby makes
big movements
or cries loudly.
R Temperature
detected above
or below the
threshold level
Display icons
Item Meaning
Range status:
Shows the signal level.
Out of service area
*1
An error occurred on the
connected camera unit.
*2
Camera unit number
*2
The battery is charging.
(page 14)
The battery is fully charged.
16
For assistance, visit www.panasonic.ca/english/support
Getting Started
To Next Page
Loading...
