(camera 4)
*7
(auto scan)
*7
21
Information
*
8
– – – –
*1 The preset lullabies in this product (“1. Lullaby1” - “10. Heart beat”) are used with
permission of © 2017 Copyrights Vision Inc.
*2 Can only be selected when a lullaby is selected for “Sound List”.
*3 Change the settings to higher levels in the following situations. Otherwise, there is a
possibility that detections may not be made correctly.
– when your baby and the camera unit are separated
– when monitoring newborn babies
*4 When sound is detected, the smart LED indicator is only lit in amber.
*5 Reduces false detections from sounds other than your baby’s voice by reducing these
sounds from the surrounding area.
If your baby’s voice is not detected when using these settings, select a baby sounds setting
with a higher sensitivity. If your baby’s voice is still not detected, select an all sounds setting.
*6 Can only be selected when there are multiple camera units registered to the monitor unit.
*7 The number of camera units available for camera selecting or auto scan differs depending
on the number registered camera units.
*8 Displays customer support Web address.
Smart features
With the use of smart features, you can
coordinate the camera unit and monitor unit to
respond automatically to detections from the
sensors. The smart features settings can be
accessed by pressing MSMARTN while viewing
images from the camera unit.
For assistance, visit www.panasonic.ca/english/support
25
Programming
To Next Page
Loading...
