Panasonic KX-HNC805C

Connections
1 Insert the AC adaptor
p
lug (A) firmly into the
camera’s micro-USB
connector.
2 Connect the AC adaptor
(B) to the power outlet.
3 Insert a microSD card
(user-supplied; C) into
the camera’s microSD
card slot.
Note:
R Use only the supplied
Panasonic AC adaptor
xxxx.
R To remove the microSD
card, push in the microSD
card and then remove it.
B
C A
Note about power connections
AC adaptor connection
R T
h
e AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or
floor-mounted AC outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of the adaptor may cause it
to become disconnected.
Power failure
R Th
e camera will not work during a power failure.
For assistance, visit www.panasonic.ca/english/support
15
Setup
HNC805C_(en-en)_0420_shinsei.pdf 15 2016/04/20 16:55:32