Setup overview
Af
ter you have connected your camera, here is what you will need to do
in order to access it from your mobile device. Each procedure is
explained in this chapter.
If you are using the camera by
i
t
self (i.e., you do not have a
KX-HNB600 hub)
If you are integrating the
c
a
mera with your Panasonic
Home Network System (i.e., you
have a KX-HNB600 hub)
1 Download (page 17)
D
ownload the [Home
Network] app to your mobile
device.
2 Initial setup for camera
(page 18)
Use the [Home Network] app
to configure the camera to
connect to your wireless
router, and then register your
mobile device to the camera.
3 Register additional mobile
devices (page 21)
Up to 8 mobile devices can
be registered to the camera.
1 D
ownload (page 17)
Download the [Home
Network] app to your mobile
device.
2 Initial setup for hub
Refer to the System Setup
Guide included with your hub.
3 Register camera to hub
(page 22)
Use the [Home Network] app
to register the camera and
configure it to connect to your
wireless router.
16
For assistance, visit www.panasonic.ca/english/support
Setup
To Next Page
Loading...
