2.9 Your logo (KX-MB2025/
KX-MB2030 only)
You can program your logo (name, company name, etc.)
so that it appears on the top of each page sent.
1 MMenuN A MBNM1NM0NM2N A MSetN
2 Enter your logo, up to 30 characters (see page 75
for character entry). A MSetN
3 Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
character, and make the correction.
R To erase all characters, press and hold MStopN.
2.10 Your fax number
(KX-MB2025/KX-MB2030 only)
You can program your fax number so that it appears on
the top of each page sent.
MFNMENMSetNMFlashN
MStopN
MMenuN
1 MMenuN A MBNM1NM0NM3N A MSetN
2 Enter your fax number, up to 20 digits.
R To enter a “+”, press MGN.
R To enter a space, press MBN.
R To enter a hyphen, press MFlashN.
R To erase a number, press MStopN.
3 MSetN
4 Press MMenuN to exit.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
R To erase all numbers, press and hold MStopN.
23
2. Preparation
To Next Page
Loading...
