Panasonic KX-MB2000HX - Erasing Caller Information; Storing Caller Information

To correct a mistake
1. Press MFN or MEN to move the cursor to the incorrect
number.
2. Press MStopN to delete the number.
3. Enter the correct number.
To delete a number
Press MFN or MEN to move the cursor to the number you
want to delete and press MStopN.
7.4 Erasing caller information
7.4.1 Erasing all caller information
1 Press MMenuN repeatedly to display “CALLER
SETUP”. A MSetN
R “CALL LIST ERASE” will be displayed.
2 MSetN
R To cancel erasing, press MStopN, then MMenuN.
3 MSetN A MStopN
7.4.2 Erasing specific caller information
R Make sure that the MFaxN light is ON.
1 MCaller IDN
2 Press MCN or MDN repeatedly to display the desired
item. A MFN A MSetN A MStopN
7.5 Storing caller information
7.5.1 Into the one-touch dial feature and
phonebook
R Make sure that the MFaxN light is ON.
1 MCaller IDN
2 Press MCN or MDN repeatedly to display the desired
item.
3 MMenuN
4 Select the station key or phonebook.
For station 1–2:
1. Press the desired station key.
2. Press MCN or MDN repeatedly to select “DIAL
MODE”. A MSetN A MSetN
For station 3:
Press the station key. A MSetN
For station 4–6:
Press MLowerN, then press the desired station key.
A MSetN
For phonebook:
Press MFN or MEN. A MSetN
5 MSetN
Note:
R To edit a name or number, see page 44.
R If you assign an item to a station key which already
contains an item, the previous item will be replaced.
R Station 1 and 2 can be used alternatively as
broadcast keys (page 45).
56
7. Caller ID (KX-MB2025/KX-MB2030 only)