Installing the KX-NT303/KX-NT305
17Document Version 2007-06
Installing t he KX-NT303/K X-NT305
To prevent damage to the telephone, be sure to unplug the
extension line before you install or uninstall the Add-on Key
Module.
KX-NT303 (For KX-NT343/KX-NT346)
1.
Open the cover.
2.
Attach the KX-NT303 to your
unit with the screws (include).
3. Plug the flat cable into the
connector (A), then bend the
cable slightly as shown (B).
4. Close the cover.
The KX-NT303/KX-NT305 allow 12/60
additional CO buttons to be connected to this
unit. These buttons are used to seize an outside
line, make a call using One-touch Dialing, or
perform a feature that has been assigned to the
key.
<with a KX-NT346>
NT300M_QRG.fm Page 17 Tuesday, May 22, 2007 11:36 AM
To Next Page
Loading...
