Location of Controls
3Document Version 2007-06
G AUTO DIAL/STORE: Used
for System/Personal Speed
Dialing or storing program
changes.
H TRANSFER: Used to transfer
a call to another party.
I REDIAL: Used to redial the
last dialled number.
J MESSAGE: Used to leave a
message waiting indication or
call back the party who left
the message waiting
indication.
K Headset Jack
L FLASH/RECALL: Used to
disconnect the current call
and make another call without
hanging up.
M HOLD: Used to place a call
on hold.
N SP-PHONE
(Speakerphone): Used for
performing hands-free
operations.
O NEXT PAGE Key: Used to
switch the page for the Self
Labeling feature. (KX-NT366
only)
P ENTER: Used to assign the
selected item.
Q Microphone: Used for hands
free conversations.
R Navigator Key: Used to
adjust the volume and the
display contrast or select
desired items.
S CANCEL: Used to cancel the
selected item.
T Flexible Outside (CO) Line
Buttons: Used to seize an
outside line or perform a
feature that has been
assigned to the key.
U LCD Panel: Can be adjusted
to the desired angle.
V Soft Buttons (S1-S4): S1-S4
(located from left to right) are
used to select the item
displayed on the bottom line
of the display.
W Message/Ringer Lamp:
When you receive an
intercom call, the lamp
flashes green, and on an
outside call, the lamp flashes
red. When someone has left
you a message, the lamp
stays on red.
NT300M_QRG.fm Page 3 Tuesday, May 22, 2007 11:36 AM
To Next Page
Loading...
