– EHS headsets
Selected Plantronics
®
-brand headsets
– Bluetooth headsets (KX-NT560 only)
For up-to-date information about headsets that have been tested
with this unit, please contact your dealer.
When selecting Ethernet cables (not included)
R Use flexible cables without jack covers. Do not use cables with a hard
coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude
from the bottom of the base.
Connect the cables as shown in the following illustration.
Ethernet cableEthernet cable
Incorrect Correct
R Use a straight CAT 5e (or higher) Ethernet cable (not included) that is
6.5 mm (
1
/4 in) in diameter or less.
When connecting to a switching hub
R If PoE is available, an AC adaptor is not needed.
R KX-NT543/KX-NT546 complies with the PoE Class 2 standard.
KX-NT560 complies with the PoE Class 3 standard.
When connecting a PC
R The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
R Ensure that the Ethernet cables and the AC adaptor cord are clamped
to prevent damage to the connectors.
25
Installation and Setup
To Next Page
Loading...
