Version 2 February 2000 KX-T7130E
- 7 - E & OE
Location of Controls
Display (Liquid Crystal
Display)
(
KX-T7130E
ONLY)
Programmable
Function
Buttons
(F1 through F12)
Flexible Exchange line
Buttons
(Exchange line 01
through Exchange line
12)
INTERCOM
Button
CONF
(Conference)
Button
FWD/DND
Button
SAVE
button
MESSAGE
Button
TRANSFER
Button
PROGRAM/PAUSE
Button
AUTO DIAL/STORE
Button
AUTO ANSWER/MUTE
Button
REDIAL
Button
RECALL
Button
HOLD
Button
SP-PHONE
Button
Card Holder
with memory station card
(KX-T7130E ONLY) Microphone (KX-T7130E ONLY)
Intercom Button and Indicator:
Used to make or receive an intercom call.
Conference Button and Indicator:
Used to create a three party conference.
REDIAL Button:
Used to redial the last dialled number.
RECALL Button:
Used to send a recall signal to a Central
Office.
Programmable Function buttons:
Can be used as One-touch Dialling
buttons or System feature buttons.
MESSAGE Button and indicator:
Can be used as Message Waiting, Direct
Station Selection or One-Touch Dialling
buttons.
SAVE Button:
(KX-T7130E ONLY)
Used to store a number temporarily.
TRANSFER Button:
Used to transfer an outside or intercom
call to another extension.
PAUSE Button:
Used to insert a Pause in a speed dial
number.
AUTO DIAL/STORE Button:
Used before dialling a speed dial number.
In ‘PROGRAM’ mode used to store a
station programming procedure in the
memory.
AUTO ANSWER/MUTE Button:
Used to answer an intercom call
automatically. Mute used to hear the other
party without them hearing you in Hands-
Free mode.
SP-PHONE Button and Indicator:
Used to make or receive a phone call
without using the Handset.
HOLD Button:
Used to place a call on Hold.
FWD/DND Button:
Used to set or cancel the Call Forwarding
or Do Not Disturb feature.
The KX-T7xxxE Range are especially designed for the visually handicapped persons.
The TRANSFER, SP-PHONE and 5 button, all have a raised pip to aid locating these buttons.
To Next Page
Loading...
