Panasonic KX-TC1743B - Page 57

During an intercom call:
• Intercom calls can only be ended with the handset
• If the handset user has difficulty hearing the base unit user, decrease the
base unit speaker volume by pressing VOLUME (3
•If an incoming call is re ceive d, the int ercom call sto ps and the unit starts to
ring To answer, press !*>) . [ a~ ] or [SP-PHONE]
Transferring a Call Using the Intercom
The intercom can be used during a call This feature enables you to
transfer a call between the handset and the base unit
From the handset to the
base unit
1 H a ndset
During a call, press
(HOLD/INTERCOM/CLEAR 1
•The call is put on hold and
“Hold” is displayed
2 H a n dset
Press
(HOLD/INTERCOM/CLEAR)
again Talk to the paged
party after the beeps
•“intercom hold" IS
displayed
•If the base unit user does not
answer, press f*N~] or [ ] to
return to call
3 B ase unit
When the paging party’s
voice is heard, answer using
the MIC
4 B ase unit
To answer the call, press
[ SP-PHONE 1
•The transfer is complete
From the base unit to the
handset
I B ase unit
During a call, press
[ LOCATOR/INTER COM]
•The call is put on hold and
“Paging Press INTERCOM”
is displayed on the handset
• If the handset user does not
answer, press (SP-PHONE) to
return to call
2 Handset
Press
(HOLD/INTERCOM/CLEAR] to
answer the page
• “Intercom hold” is
displayed
3 Handset
To answer the call, press
Sor©
•The transfer is complete
57