To Next PageTo Next Page
Need help?Do you have a question about the Panasonic KX-TCD420BXM and is the answer not in the manual?
General| Number of Handsets | 1 |
|---|---|
| Caller ID | Yes |
| Display | LCD |
| Battery Type | Ni-MH |
| Talk Time | Up to 10 hours |
| Remote Access | Yes |
| Call Screening | Yes |
| Type | Answering Machine |
| Phonebook Capacity | 50 entries |
| Speakerphone | Yes |
| Power Source | AC adapter |
Warning about unauthorized copying and distribution being a violation of law.
Caution regarding battery replacement and disposal.
Procedure to reset the base unit PIN to default.
Steps to take before contacting customer support for issues.
Procedure to check the base unit's power supply.
Procedure to check the handset's power supply.
Procedure to check the handset's battery charge circuit.
Procedure to check the handset link.
Procedure to check the base unit's battery charge circuit.
Procedure to check the charger unit's power supply.
How to check the handset's transmission.
Procedure to check the link between base unit and handset.
How to check the handset's reception.
Adjustment procedures for the base unit after part replacement.
Confirming the 2.65V supply voltage.
Checking hookswitch operation and DC characteristics.
Checking and adjusting modulation parameters.
Checking and adjusting receive audio levels.
Checking and adjusting transmit audio levels.
Adjustment procedure for the charger unit.
Confirming the DTMF generator output.
Checking the charging circuit operation.
Standard procedures for connecting equipment for charger unit adjustments.
Adjusting the BBIC clock frequency.
Confirming the 4.0V supply voltage on the handset.
Confirming timing accuracy on the handset.
Adjustment procedures for the handset after part replacement.
Confirming battery monitor function.
Checking and adjusting modulation on the handset.
Checking and confirming transmit audio on the handset.
Confirming the VBACK status voltage on the handset.
Confirming frequency offset on the handset.
Confirming RSSI level on the handset.
Confirming battery low indication.
Confirming the BBIC checksum on the handset.
Confirming receiver sensitivity on the handset.
Adjusting the BBIC clock on the handset.
Checking and confirming receive audio on the handset.
Confirming transmitted power on the handset.
Checking charge control and current.
Confirming charge detection status.
