To Next PageTo Next Page
Need help?Do you have a question about the Panasonic KX-TG1061 and is the answer not in the manual?
General| Type | Cordless |
|---|---|
| Number of Handsets | 1 |
| Answering System Type | Digital |
| Answering System Recording Time | 18 minutes |
| Caller ID | Yes |
| Call Waiting Caller ID | Yes |
| Talk Time | Up to 10 hours |
| Display | LCD |
| Battery Type | Ni-MH |
| Speakerphone | Yes |
| Phonebook Capacity | 50 |
| Intercom | Yes |
Charge the handset batteries for approximately 7 hours before the first use.
Use only the specified power source and ensure secure outlet connections to prevent hazards.
Avoid moisture, proper cord management, and do not place near automatic devices.
Unplug for cleaning, no disassembly, check RF energy for medical devices.
Avoid installing wiring during storms or in wet locations; handle wires with care.
Use specified Ni-MH batteries, do not mix old/new, handle to prevent burns or ingestion.
Follow basic safety rules to reduce risk of fire, electric shock, and injury.
Place base unit centrally, away from obstructions and electronic interference for optimal coverage.
Keep product away from smoke, dust, high temperatures, direct sunlight, and heat sources.
Wipe the outer surface with a soft moist cloth; avoid harsh cleaners or abrasive powders.
Erase private information before disposing, transferring, or returning the product.
Product designed for USA; sale/use in other countries may violate local laws.
Product meets ENERGY STAR guidelines for energy efficiency.
Identifies and lists controls for the telephone base unit, including corded handset and buttons.
Identifies and lists controls for the telephone handset, including keypad, display, and buttons.
Connect the AC adaptor and telephone line cord to the base unit and wall jack.
Install specified Ni-MH batteries into the handset, ensuring correct polarity.
Charge handset batteries for about 7 hours until 'Charge completed' is displayed.
Notes on AC adaptor connection, battery cleaning, and charging.
Base unit works as standard phone; speakerphone and cordless handset may not function.
Instructions for dialing numbers and completing calls using the corded base unit.
How to activate and use the speakerphone function during conversations.
Instructions for dialing numbers and completing calls using the cordless handset.
How to answer calls using the corded handset or speakerphone on the base unit.
How to answer calls using the cordless handset, including any-key answer.
Compatibility with Caller ID, subscription requirements, and call logging features.
Instructions for enabling or disabling the answering system via base unit or handset.
Steps to record a personalized greeting message using the handset.
How to listen to recorded messages using the base unit.
Information on FCC rules, registration, Ringer Equivalence Number (REN), and compliant cords.
Procedures for network issues, company changes, and troubleshooting.
Guidelines for connecting to party lines and ensuring alarm equipment compatibility.
Ensure alarm equipment is not disabled; check hearing aid compatibility and RF interference.
Instructions for programming and testing emergency numbers, including dispatcher notification.
Device must not cause harmful interference and must accept received interference.
Measures to correct radio/TV interference and placement of cordless phones.
Base unit must be installed 20cm from body; do not collocate with other transmitters.
Indicates reduced noise and interference for T-Coil equipped hearing aids.
Product designed for USA; sale/use in other countries may violate local laws.
Contact Panasonic via website, phone, or TTY for setup and operation help.
Instructions for packing, detailing symptoms, and sending the unit for service.
