7
Setting up
Connections
L Use only the supplied Panasonic AC
adaptor PQLV219.
NBase unit
*For DSL/ADSL service users
NCharger
Battery installation
L USE ONLY Ni-MH batteries AAA
(R03) size.
L Do NOT use Alkaline/Manganese/Ni-
Cd batteries.
L Confirm correct polarities (S, T).
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged,
“Charge completed” is displayed.
(120 V AC, 60 Hz)
Hooks
Rechargeable Ni-MH ONLY
Confirm "Charging"
is displayed.
TG106x.book Page 7 Tuesday, October 28, 2008 3:25 PM
To Next Page
Loading...
