- When you replace the batteries, part should be removed first.
4.2. Battery Charge
At the time of shipment, the batteries are not charged. To charge, place the handset on the base
unit.
Please charge the batteries for about 7 hours before initial use. During charging, the charge
LED will light as shown below.
The handset which power is off will be turned on automatically when it is placed on the base
unit.
The handset will not operate while it is on the base unit.
If you do not recharge the handset battery for more than 15 minutes, the display will flash
NOTATION PUBLIC "-//ALDUS//NOTATION TAGGED IMAGE FILE FORMAT//EN"
ENTITY SYSTEM "_batflas.tif"
when the
handset is lifted off the base unit.
5
To Next Page