Panasonic KX-TCD320FX - Call Options

Handset Settings
28
Note:
L If “Base Number” is selected and the
current base unit number is 2, “-2-” is
displayed.
L If “Handset Number” is selected and the
current handset number is 2, “[2]” is
displayed.
Changing the display language
1
Press $ (middle soft key).
2 Select Y, then press ,.
3 Select “Display Setup”, then press
,.
4 Select “Select Language”, then
press ,.
5 Select the desired language, then press
,.
6 Press {ih}.
Note:
L If you select a language you cannot read,
press {ih}, $, press {v}, press
,, press {v} 2 times, press ,,
press {v} 3 times, press ,, select the
desired language, then press ,. Press
{ih}.
Changing the display contrast
This feature is available for wallpaper and
display icons.
1 Press $ (middle soft key).
2 Select Y, then press ,.
3 Select “Display Setup”, then press
,.
4 Select “Contrast”, then press ,.
5 Press {e} or {v} repeatedly to select
the desired contrast, then press ,.
6 Press {ih}.
Call options
Turning call bar on/off
This feature prohibits making outside calls.
When call bar is turned on, only intercom
calls and calls to emergency numbers (page
33) can be made.
1 Press $ (middle soft key).
2 Select Y, then press ,.
3 Select “Call Options”, then press
,.
4 Select “Call Bar”, then press ,.
5 Enter “0000” (default handset PIN).
L If you changed the PIN, enter it (page
29).
6 Select “On” or “Off”, then press ,.
7 Press {ih}.
Note:
L When call bar is turned on, x is
displayed.
Turning auto talk on/off
When this feature is turned on, you can
answer calls simply by lifting the handset off
the base unit. You do not need to press
{C}.
1 Press $ (middle soft key).
2 Select Y, then press ,.
3 Select “Call Options”, then press
,.
4 Select “Auto Talk”, then press ,.
5 Select “On” or “Off”, then press ,.
6 Press {ih}.
TCD320FX(e).book Page 28 Tuesday, January 18, 2005 1:25 PM