Base Unit Settings
35
6 Enter the new 4-digit base unit PIN, then
press ,.
7 Press {ih}.
Resetting the base unit to its
default settings
1
Press $ (middle soft key).
2 Select Z, then press ,.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
34).
4 Select “Other Options”, then press
,.
5 Select “Reset Base”, then press
,.
6 Select “Yes”, then press ,.
7 Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 31, 42, 50
– All SMS messages
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries
– Repeater mode
– Recordings, including your greeting
message, caller messages, voice
memos, audible call announcements,
and recorded conversations
TCD320FX(e).book Page 35 Tuesday, January 18, 2005 1:25 PM
To Next Page
Loading...
