33
Cordless Telephone
Initial Settings
Reset Base Unit Settings
• To exit the operation, press any time.
*1 The factory preset is 0000.
Base Unit Initial Settings
Function Initial Setting
Ringer Mode All Handsets
Number of Rings 3
Flash Timing 600 msec
Pause Timing 3 seconds
Call Restricted Handsets All Clear
Call Restriction Numbers All Clear
4-Digit Base Unit PIN 0000
Press OK.
4-digit Base Unit PIN*1
Press MENU.
Search/Select
"Setting Base".
"Input Command"
0
1
45
23
450NZ_e.book Page 33 Monday, May 12, 2003 4:20 PM
To Next Page
Loading...
