Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 51
Telephone System
SMS Feature (Text Message)
Entering a Number from the Caller ID List
Entering a Number from the Redial List
• “Sending Message” is displayed after step 8. The display returns to the standby
mode, then “Transferring Message” is displayed on both cordless handset and
base unit display.
• Once you have created a SMS message, the unit will display “
WUse Last Text?”
each time you select “Create”. If you want to use the text of the last message sent
once again, move the JOYSTICK up to recall the last message.
• If you try to send a message using a phone number (Destination) over 20 digits long
from one of the Handset Phonebook, Caller ID or Redial lists, “Invalid Number” is
displayed and the display returns to “<Enter Phone No>”.
• The maximum message length is 160 characters. Please consult your SMS service
provider for further details.
• 69 messages can be memorized when you enter 80 characters/1 message.
• If your phone is connected to PBX (Private Branch eXchange: private branch
exchange), see page 60 to enter the destination number.
Follow steps 1 to 5 on the previous page, then:
6
Select the desired item.
twice
Go to step 7.
Follow steps 1 to 5 on the previous page, then:
6
Press RIGHT SOFT
KEY.
Select the desired item.
twice
Go to step 7.
Follow steps 1 to 6 on the previous page and above, then:
7
“Save?” is displayed, then select
“Yes” or “No”. (If “Yes” is selected,
“Saved Message” is displayed.)
8
Select “Send”.
535E_E_03.fm Page 51 Thursday, August 7, 2003 2:58 PM
To Next Page
Loading...
