Panasonic KX-TES824ML - Page 3

Panasonic KX-TES824ML – System Setting Quick Reference Guide
Enable or Disable CO Trunks for Day Mode - PGM NO: 405
www.fjt.com.my
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米 # , LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 5 for Day mode, LCD display “ Day Out CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “ CO 1: #01: Enable “
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit
Enable or Disable CO Trunks for Night Mode - PGM NO: 406
1. Press [PROGRAM] , LCD display “ PITS – PGM NO? -> “
2. Press 米 # , LCD display “ Password “
3. Key in password 1 2 3 4 , LCD display “ SYS – PGM NO? “
4. Enter 4 0 6 for Night mode, LCD display “ Night Out CO “
5. Press [SP-PHONE], LCD display “ CO NO? -> “
6. Press [SP-PHONE], LCD display “CO 1: #01: Enable ”
7. Press [AUTO ANS] to change to Disable. Press [AUTO ANS] again to change to Enable
8. Press [AUTO DIAL] to save setting
9. Press [FWD/DND] to move to next Jack NO. Press [CONF] to back to previous Jack NO.
10. Repeat step 7 & 8 follow by step 9 for next Jack NO.
11. Press [SP-PHONE] for next CO NO. or press [HOLD] to end
12. Press [PROGRAM] to Exit