To Next PageTo Next PageWhy can't the other party leave a message on my Panasonic KX-TG1223BX Cordless Telephone?
If the other party complains that they cannot leave a message on your Panasonic Cordless Telephone, select '1 Minute' or '3 Minutes' for the recording time. Erase unnecessary messages because the message memory might be full.
Why does my Panasonic Cordless Telephone not ring?
If your Panasonic Cordless Telephone does not ring, adjust the handset ringer volume and the base unit ringer volume. Also, ensure that the night mode feature is turned off.
What to do if my Panasonic Cordless Telephone handset/base unit stops working while being used?
If the handset/base unit stops working while being used, disconnect the AC adaptor and turn off the handset. Connect the AC adaptor, turn on the handset and try again.
Why is there static or sound cutting in and out on my Panasonic KX-TG1223BX Cordless Telephone?
If you are experiencing static or sound cutting in and out on your Panasonic Cordless Telephone, try the following: Locate the handset and the base unit away from other electrical appliances. Move closer to the base unit. If you have DSL service, connect a filter between the base unit and the telephone line jack.
Why is there noise during a call on my Panasonic Cordless Telephone?
If you hear noise during a call on your Panasonic Cordless Telephone, move the handset and base unit away from interference sources, such as antennas and mobile phones.
Why does the display return to standby mode while viewing caller information on my Panasonic KX-TG1223BX?
If, while viewing caller information, the display returns to standby mode on your Panasonic Cordless Telephone, do not pause for over 1 minute while searching.
Why doesn't pressing {R} display/dial the last number dialled on my Panasonic KX-TG1223BX Cordless Telephone?
If pressing {R} does not display/dial the last number dialled on your Panasonic Cordless Telephone, the redialled number was more than 24 digits long, so redial the number manually.
Why does my Panasonic KX-TG1223BX ring and stop recording while recording a greeting message?
If, while recording a greeting message or listening to messages, the unit rings and recording stops on your Panasonic Cordless Telephone, a call is being received. Answer the call and try again later.
What to do if 7 still flashes after fully charging the batteries on my Panasonic KX-TG1223BX Cordless Telephone?
If you fully charged the batteries, but 7 still flashes on your Panasonic Cordless Telephone, clean the charge contact and charge again. It may also be time to replace the batteries.
Why is a busy tone heard when pressing {C} on my Panasonic KX-TG1223BX?
If a busy tone is heard when {C} is pressed on your Panasonic Cordless Telephone, move closer and try again, the handset may be too far from the base unit. Another handset or the base unit may be on an outside call, so wait for the other user to complete the call.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG1223BX |
| Category | Cordless Telephone |
| Language | English |
Covers digital answering system functionality and customizable polyphonic ringtones.
Covers general safety, environmental considerations, and battery handling guidelines.
Diagrams and descriptions of all buttons, indicators, and displays on the handset and base unit.
Instructions for connecting the unit, installing, and charging the handset batteries.
Information on battery charge levels, expected life, and procedures for battery replacement.
Guide to powering on/off, setting dialling mode, and configuring date and time.
Instructions for dialling, using speakerphone, and utilizing the redial feature.
Procedures for answering incoming calls using either the handset or the base unit.
Adding, searching, and editing up to 200 entries with categories.
Using a common phonebook across multiple handsets for dialling and recording.
Chart detailing all customizable settings for the handset and their locations.
Setting start/end times and ring delay for night mode to silence the handset.
Enabling or disabling call bar for restricting calls and auto talk for answering.
Restoring all handset settings to factory defaults.
Chart detailing all customizable settings for the base unit.
Configuring night mode, ring delay, and ringer settings for the base unit.
Restricting specific extensions (base unit/handsets) from dialling certain numbers.
Prohibiting outside calls from the base unit, allowing only specific types of calls.
Setting or changing the PIN for base unit security purposes.
Restoring all base unit settings to their original factory defaults.
Solutions for problems related to initial setup, power, and connections.
