To Next Page
D
Dawn HudsonOct 27, 2025
Why is w flashing on my Panasonic Cordless Telephone?
- Bbarry07Oct 28, 2025
If the 'w' indicator is flashing on your Panasonic Cordless Telephone, it could be due to several reasons. First, ensure the handset is not too far from the base unit; if it is, move closer. Next, verify that the AC adapter is properly connected. Electrical interference can also cause this issue, so try placing the handset and base unit away from sources like antennas and mobile phones. Finally, the handset registration might be cancelled. To re-register, follow these steps: 1. Press {j/OK}. 2. Select “SETTING HS” using {>}. 3. Choose “REGISTRATION” using {>}. 4. Select “REGISTER HS” using {>}. 5. Press and hold {x} on the base unit for about 5 seconds. If all registered handsets start ringing, press {x} to stop, then start again from step 1. Note: The rest of the procedure must be c...
General
