Panasonic KX-TG1311E - Base Unit Settings and Call Restriction

Useful Telephone Settings
16 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Guide to base unit settings
To customise the base unit (general approach):
1 {j/OK}
2 Press {v} or {e} to select “SETTING BS”. i {>}
L “INPUT CODE” is displayed.
3 Enter the desired code number. Follow the instructions in the “Feature”
column of the chart.
L To exit the operation, press {ih}.
Code No. Feature (default setting)
{0} Reset base unit to its default settings.
*1
− Enter base unit PIN (default: “0000”).
*2
i {>}
{5} Change base unit PIN (“0000”).
*3
− Enter the current 4-digit base unit PIN.
*2
− Enter the new 4-digit base unit PIN.
− Enter the new 4-digit base unit PIN again.
{6} Call restriction
*4
■ Setting call restriction
− Enter base unit PIN (default: “0000”).
*2
i Enter
the desired handset number by pressing the
appropriate dial key.
L The selected handset number flashes on the
display.
− {>}
− Enter the phone number to be restricted (8 digits
max.).
L To select a different memory location, press {>}
and enter a number.
− {>}
■ Turning on/off call restriction
− Enter base unit PIN (default: “0000”).
*2
L Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
− Enter the desired handset number by pressing the
appropriate dial key to turn on/off. i {>} 2 times
Emergency number (“112”, “999”)
*5
− Enter base unit PIN (default: “0000”).
*2
i {*}
■ Storing:
− Enter the emergency number (8 digits max.).
L To select a different memory location, press
{>} and enter a number.
− {>}
■ Editing:
Press {>} to display the desired number. i {C}
i Enter the new emergency number. i {>}
Code No. Feature (default setting)
TG1311_1312_1313E(e).book Page 16 Thursday, June 19, 2008 1:46 PM