Panasonic KX-TG1311FX - Operating Instructions Symbols; Display Language and Dialing Mode; Date and Time Setting

Preparation
10
Symbols used in these operating
instructions
Display language
22 display languages are available.
You can select “ENGLISH”, “ESPANOL”, “FRANCAIS”, “ITALIANO”,
“NEDERLANDS”, “TURKCE”, “MAGYAR”, “PORTUGUES”, “POLSKI”,
“DEUTSCH”, “SLOVENSKY”, “CESTINA”, “HRVATSKI”, “SLOVENSCINA”,
“EESTI”, “LIETUVISKAI”, “LATVIESU”, “ROMANA”, “BULGARSKI”,
“SRPSKI”, “MAKEDONSKI”, or “SHQIP”.
1 {j/OK}
2 {v}/{e}: “SETTING HS” i {>}
3 {v}/{e}: “DISPLAY OPT” i {>}
4 {v}/{e}: “LANGUAGE” i {>}
5 {v}/{e}: Select your desired language. i {>} i {ih}
Note:
L If you select a language you cannot read: {ih} i {j/OK} i {v}
i {>} i {v} 3 times i {>} i {v} 2 times i {>} i
{v}/{e}: Select your desired language. i {>} i {ih }
Dialling mode
If you cannot make calls, change this setting according to your telephone
line service. The default setting is Tone.
“1” (Tone): For tone dial service.
“2” (Pulse): For rotary/pulse dial service.
1 {j/OK}
2 {v}/{e}: “SETTING BS” i {>} i {3}
3 Enter base unit PIN (default: “0000”). i {1}
L If you forget your PIN, contact your nearest Panasonic service centre.
4 Select the desired setting by pressing {1} for tone dialling mode or {2}
for pulse dialling mode.
5 {>} i {ih}
Date and time
1 {j/OK}
2 {v}/{e}: “SETTING BS” i {>} i {*}
3 Enter the current hour and minute (24-hour time entry).
L If you make a mistake, press {C}. Digits are cleared from the right.
4 {>}
L A beep is heard.
5 {>} i {*} 2 times
6 Enter the current date, month, and year.
L If you make a mistake, press {C}. Digits are cleared from the right.
7 {>} i {ih}
Symbol Meaning
{j/OK} Press {j/OK}.
i Proceed to the next operation.
{v}/{e}: “ ” Press {v} or {e} to select the words in
quotations.
Example: {v}/{e}: “OFF”
TG1311_1312FX(e).book Page 10 Tuesday, August 5, 2008 7:18 PM