Panasonic KX-TG5050 - Direct Commands; VM Tone Detect; Set Dial Mode; Set Flash Time

Answering System
Preparation
45
For assistance, please call: 1-800-211-PANA(7262)
Telephone System Useful Information
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0]
to [9], and [#]) instead of using the soft keys.
Menu item Command Selection items Page
Ringer volume [1] [1] [0] : Off [1] : Low [2] : Medium
[3] : High
p. 16
Ringer tone [1] [2] [1]–[3] : Tone pattern 1–3
[4]–[7] : Melody pattern 1–4
[8]–[9] : Downloaded melody
pattern 1–2 *
1
p. 17
Voice enhancer [5] [1] : On [0] : Off p. 21
Activate Caller IQ *
2
[7] [1] –
View information *
4
[7] [2] *
5
Go to Step 4 on page 54. –
Get new information *
3
[7] [3] *
5
Go to Step 4 on page 53. –
Turn Caller IQ off *
3
[7] [4] *
5
p. 51
Turn Caller IQ on *
3
[7] [5] *
5
p. 51
LCD contrast [0] [1] [1]–[6] : Level 1–6 p. 18
Key tone [0] [2] [1] : On [0] : Off p. 40
Auto talk [0] [3] [1] : On [0] : Off p. 15
Caller ID Number Auto Edit [0] [4] [1] : On [0] : Off p. 27
Set dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 14
Set flash time [0] [5] [2] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
[5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
p. 39
Set line mode [0] [5] [3] [1] : A [2] : B p. 15
Store VM access# [0] [7] [1] Go to Step 5 on page 34. –
VM tone detect [0] [7] [2] [1] : On [0] : Off p. 35
Change language [0] [8] [1] : English [2] : Spanish p. 14
Message alert [0] [#] [1] : On [0] : Off p. 18
Handset