Panasonic KX-TG5230C - Dialing Mode; Line Mode

Useful InformationAnswering SystemTelephone System
17
Programmable Settings
Preparation
Dialing Mode
If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse
service, set to “Pulse”. The factory preset is “Tone”.
Line Mode
The line mode is preset to “B” and generally should not be adjusted. If “ ” is
not displayed on the handset properly, the line mode selection is incorrect. Set line
mode to
“A” .
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Press the soft key ( ) at “Set dial
mode”.
5 Select “Pulse” or “Tone” by pressing [d] or
[B].
6 Press the soft key ( ), then press [OFF].
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Set tel line” by pressing [d] or
[B], then press the soft key ( ).
4 Scroll to “Set line mode” by pressing [d]
or [B], then press the soft key ( ).
5 Select “A” or “B” by pressing [d] or [B].
6 Press the soft key ( ), then press [OFF].
Handset
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set dial mode
Set dial mode
:Tone
SAVE
Handset
IN USE
SELECT
Initial setting
SELECT
Set tel line
SELECT
Set line mode
Set line mode
:B
SAVE
TG5230C_English.fm Page 17 Tuesday, May 11, 2004 9:08 AM