Useful Information
Advanced Operation
Preparation
47
Transferring a Call
Telephone System
From a to another
(when the system has two or more handsets)
• If the Auto Talk feature is turned on (p. 18), the paged handset user can also
answer a page by simply lifting the handset off the base unit (or the charger, for
accessory handset users, p. 3).
• Any user can answer a transferred call by pressing [C], [s], or [SP-PHONE]
.
• If you call an extension from the handset in step 1, and the extension is in use, the
display will show “Busy” then “Hold”.
Press [C] or [s] to return to the outside call. To transfer the call to another
extension, repeat from step 1.
1 During a call, press [HOLD/INTERCOM], then page another handset
by pressing its extension number ([1] to [4]).
2 Wait for the paged party to answer, then you can announce the
transfer.
• The paged handset user can answer by pressing [C], [s], or [HOLD/
INTERCOM]. (Any button except [d], [B] or [OFF] can be pressed to
answer the page.)
• If the paged party does not answer, press [
C] or [s] to return to the outside
call.
3 To complete the transfer, press [OFF].
Handset Handset
TG5230C_English.fm Page 47 Tuesday, May 11, 2004 9:08 AM
To Next Page
Loading...
