Panasonic KX-TG5240 - Installation and Setup; Connecting the Unit

12
Installation
Connections
• USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z) .
• The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
• If your unit is connected to a PBX which does not support Caller ID, you cannot
access Caller ID services.
• This unit will not function during a power failure. We recommend connecting a
standard telephone to the same telephone line or to the same telephone jack
using the Panasonic KX-J66 T-adaptor.
Telephone Line Cord
Single-Line Telephone Jack (RJ11C)
AC Adaptor
Power Outlet (AC 120 V, 60 Hz)
Raise the antennas.
Hook
Bottom of the base unit
Fasten the AC adaptor cord.