Intercom Features
For assistance, please visit http://www.panasonic.com/consumersupport 39
call will ring at your handset again. If you
still do not answer the call within 4
minutes, the call will be disconnected.
Transferring a call from the base
unit
Important:
L When you page all handsets, only the
handset user who answers first can take
the transferred call.
1 During an outside call, press
{INTERCOM}.
L The call will be put on hold.
2 To page a specified handset, press its
extension number ({1} to {8}).
To page all handsets, press {0}.
To make a voice announcement to all
handsets, press {*} (A), then speak
into the MIC when the SP-PHONE
indicator stops flashing.
3 Wait for the paged party to answer.
L The paged handset user can answer
by pressing {C}, {s}, or
{INTERCOM}.
L If there is no answer, press
{INTERCOM} to return to the outside
call.
4 To complete the transfer, press {SP-
PHONE}.
Transferring a call without speaking to
the paged party
1 During an outside call, press
{INTERCOM}.
2 To page a specified handset, press its
extension number ({1} to {8}).
To page all handsets, press {0}.
To make a voice announcement to all
handsets, press {*} (A), then speak
into the MIC when the SP-PHONE
indicator stops flashing.
3 Press {SP-PHONE}.
L The outside call rings at the paged
handset(s).
Note:
L If the paged party does not answer the
call, press {SP-PHONE} to return to the
call. If not answered within 1 minute, the
call will ring at the base unit again. If you
still do not answer the call within 4
minutes, the call will be disconnected.
To Next Page
Loading...
