Phonebook
For assistance, please visit http://www.panasonic.com/phonehelp 23
Searching for a name by initial
1 {Phonebook} i {Search}
2 Press the dialing button ({0} to {9},
{#}, or {*}) that corresponds to the
first letter you are searching for (see the
character table, page 22).
Example: “LISA”
Press {5} repeatedly to display the first
phonebook entry starting with the initial
“L” and go to step 3.
L If there is no item corresponding to
the letter you selected, the next item
is displayed.
3 Press {V} to select the desired item.
4 Press {C} to dial the phone number.
Editing items in the phonebook
1 Find the desired item (page 22, 23). i
{Option} i “Edit” i {Select}
2 Edit the name if necessary (see the
character table, page 22). i {Next}
3 Edit the phone number if necessary.
i {Next} i {Save} i {OFF}
Erasing items in the phonebook
1 Find the desired item (page 22, 23).
2 {Erase} i {Yes} i {OFF}
Chain dial
This feature allows you to dial phone
numbers in the handset phonebook while
you are on a call. This feature can be used,
for example, to dial a calling card access
number or bank account PIN that you have
stored in the handset phonebook, without
having to dial manually.
1 During an outside call, press {MENU}.
2 “Phonebook” i {Select}
3 Find the desired item (page 22, 23). i
{Call}
Note:
L When storing a calling card access
number and your PIN in the phonebook
as one phonebook item, press {PAUSE}
to add pauses after the number and PIN
as necessary (page 18).
L If you have rotary or pulse service, you
need to press {*} before pressing
{MENU} in step 1 to change the dialing
mode temporarily to tone.
TG562X.book Page 23 Friday, February 10, 2006 1:41 PM
To Next Page
Loading...
