Programming
28 For assistance, please visit http://www.panasonic.com/phonehelp
Programmable settings
You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods: scrolling through the display menus (page 28)
or using the direct commands (page 30).
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1 {MENU}
2 Press {^} or {V} to select the desired menu. i {Select}
L If there is a sub-menu(s), press {^} or {V} to select the desired item. i {Select}
Example: To access the handset ringer tone setting
Press {^} or {V} to select “Ringer setting”. i {Select}
Then press {^} or {V} to select “Ringer tone”. i {Select}
3 Press {^} or {V} to select the desired setting.
L This step may vary depending on the feature being programmed.
4 {Save} i {OFF}
Main menu Sub-menu 1 Sub-menu 2 Page
V.M. access – – page 33
Ringer setting Ringer volume ––
Ringer tone ––
Ring color ––
Voice enhancer –––
Copy phonebook
*1
Copy 1 item – page 24
Copy all items – page 24
Customer support – – page 31
TG562X.book Page 28 Friday, February 10, 2006 1:41 PM
To Next Page
Loading...
